World Association of Newspapers and News Publishers


INGEDE Symposium 2018: Reaching a Higher Level – Together Chances and Challenges can be met

Language switcher

Available in:

INGEDE Symposium 2018: Reaching a Higher Level – Together Chances and Challenges can be met

Article ID:

21561

Collection, Quality, and Industrial Processing of Paper for Recycling: A Wide Range of Topics at the INGEDE Symposium on February 28, 2018, in Munich

09.01.2018 – The challenges increase, not only for the deinkers among paper mills – it becomes more and more difficult to produce new graphic paper from paper for recycling at economically reasonable conditions. Rising prices for paper for recycling increase the costs, at the same time the availability of graphic paper is going down – people read less newspapers, the newspapers become thinner due to less advertising, and the paper collected for recycling contains more and more packaging. The municipalities sometimes take advantage of new legislation to discourage locally competing selective collectors who deliver especially preferred quality. Concerned about the quantity of their supplies it becomes more and more difficult for the paper mills to keep up their requirements for high quality. A helpful aspect is the increasing importance of ecolabels such as the Blue Angel or the EU Ecolabel for printed products, for which also the removability of printing inks has to be proven.

Quality is not only important for deinking grades, also the manufacturers of corrugated papers and board face the challenge to meet the rising demand at an acceptable quality, mainly for the increasing need for all kinds of packaging. A possible source for high quality paper for recycling is the fraction today known as mixed paper. How can, already by a more selective collection and sorting at the consumer, the yield be increased for the different grades, suitable for the different products? Here it is of some help to know the material flow: Where do the different fractions of paper for recycling end up, that are so valuable for the different grades to be produced?

New digital printing processes are a perennial issue at the INGEDE Symposium in Munich: Mostly the inks and therefore also their behaviour in the deinking process differ fundamentally from traditional offset and gravure inks. While dry toners (from laser printers) are generally good deinkable, some inkjet prints create problems. But here a lot has been achieved within the last years, some manufacturers have improved their processes and inks significantly. David Croll of Océ Printing Systems will present the history of inkjet printing and new, better deinkable inkjet processes at the symposium.

Undeinkable Prints can Create Problems in the recycling Process

Some might remember that prints with liquid toner from HP Indigo are not suitable for the deinking process. Similar problems can arise from UV-curable inks – here the inks cross-link due to a polymerisation induced by UV light sources. In many cases the resulting large particles are not sufficiently separable, also because they are not as water-repellent (hydrophobic) compared to traditional offset inks. But also here some differences can be observed; at the INGEDE Symposium the reasons for the increasing prevalence of UV-cured prints and the resulting problems will be discussed.

Quality of Paper for Recycling Continues to be a European Issue

Different collection rates in different European countries continue to be a challenge. In his keynote presentation, Ulrich Leberle of CEPI in Brussels will explain the measures for a circular economy that the European Commission aims at together with the European paper industry.

Paper Industry 4.0: The Digital Revolution in Papermaking?

The classical process optimisation undergoes a revolution. There are new and better answers to old questions, better than ever: Jürgen Käser, Voith’s expert for the paper industry 4.0, will present these answers. Which kind of raw material composition will reduce production costs without harming productivity? What is the relationship between the frequency of tear-off and the way the plant is being run? What application of primary energy is absolutely necessary for a certain grade? Novel mathematical modelling in real-time lead to new process dynamics, this results in highly stabilised and cost effective production processes – not to be reached by human hand so far. And the first practical applications show: Also papermaking is at the edge of a digital revolution.

Since its establishment in 1989, INGEDE for more than 25 years now deals with the common problems of the deinkers. INGEDE has become well known also for the development of test methods that in the meantime have become international standards.

You are welcome to join us for the upcoming INGEDE Symposium on February 28, 2018 in Munich! Hear and discuss with us about recent topics in paper recycling and the state of research projects financed by INGEDE! The INGEDE Symposium is the only international meeting  covering all aspects from paper recovery to quality aspects to process engineering issues. The full program together with updated details will soon be available here.

Registration, Travel, and Accomodation

Registration: Free of charge for member companies and the press, for all others please understand that we charge a nominal fee to cover our expenses. Please contact us for an invitation if you’re not on our mailing list yet.

The venue, “Haus der Bayerischen Wirtschaft”, is within walking distance from Munich Central Station. See how to find to the “Haus der Bayerischen Wirtschaft” on the site of Haus der Bayerischen Wirtschaft: There are only a few parking places available. Paid parking on the streets around is possible but usually very limited.

Due to heavy traffic and difficult parking it is recommended to use public transport (download this map, print it and take it with you):

The S-Bahn coming from the airport stops close at Karlsplatz (leave the airport with either S1 or S8, both are arriving after about 40 minutes; trains to and from the airport leave about every ten minutes). Exit the S-Bahn station towards Lenbachplatz/Ottostraße, follow Ottostraße until Max-Joseph-Straße (on your left). Walking distance from Karlsplatz is about five minutes.

Coming from Munich Hauptbahnhof leave the building towards Elisenstraße, cross Elisenstraße and follow it to your right towards Karlsplatz, pass Sophienstraße (on your left) and turn left at Ottostraße (Tram tracks), follow Ottostraße until Max-Joseph-Straße (on your left). You can also take the tram 27 towards Petuelring or tram 28 towards Scheidplatz for one stop (Ottostraße).

Hotel Information

There are many hotels in the central Munich area. Quite reasonable (currently from 60 EUR incl. tax excl. breakfast) and right across the street north of Hauptbahnhof is Hotel Amba*** (www.hotel-amba.de).

Here for the nights around the 2018 symposium we suggest you book yourself via the hotel website; we were not able to negotiate rates that are even better. Book on the hotel’s website as prices are always 10 % below the rates on HRS or other booking sites.

From this hotel you can walk to the venue within less than 15 minutes.

(http://www.ingede.com)


Attachments

Author

Michael Spinner-Just's picture

Michael Spinner-Just

Date

2018-01-09 12:33

The World Printers Forum (WPF) is an organisation of newspaper printers and suppliers within WAN-IFRA. It promotes the power of print and the sustainability of print production. Read more ...